Metal fabrication - Steel Fabricator

- 21.47

Badger Sheet Metal Works Features Rare Steel Fabrication Shop ...
photo src: www.bsmw.com

Metal fabrication is the building of metal structures by cutting, bending, and assembling processes.

It is a value added process that involves the creation of machines, parts, and structures from various raw materials. A fabrication shop will bid on a job, usually based on the engineering drawings, and if awarded the contract will build the product. Large fab shops employ a multitude of value added processes in one plant or facility including welding, cutting, forming and machining. These large fab shops offer additional value to their customers by limiting the need for purchasing personnel to locate multiple vendors for different services. Metal fabrication jobs usually start with shop drawings including precise measurements, then move to the fabrication stage and finally to the installation of the final project. Fabrication shops are employed by contractors, OEMs and VARs. Typical projects include loose parts, structural frames for buildings and heavy equipment, and stairs and hand railings for buildings.


Steel.jpg
photo src: fabricationsystems.co.ug


Maps, Directions, and Place Reviews



Processes

  • Cutting is done by sawing, shearing, or chiseling (all with manual and powered variants); torching with hand-held torches (such as oxy-fuel torches or plasma torches); and via numerical control (CNC) cutters (using a laser, mill bits, torch, or water jet).
  • Bending is done by hammering (manual or powered) or via press brakes and similar tools. Modern metal fabricators use press brakes to either coin or air-bend metal sheet into form. CNC-controlled backgauges use hard stops to position cut parts in order to place bend lines in the correct position. Off-line programming software now makes programming the CNC-controlled press brakes seamless and very efficient.
  • Assembling (joining of the pieces) is done by welding, binding with adhesives, riveting, threaded fasteners, or even yet more bending in the form of a crimped seam. Structural steel and sheet metal are the usual starting materials for fabrication, along with the welding wire, flux, and fasteners that will join the cut pieces. As with other manufacturing processes, both human labor and automation are commonly used. The product resulting from fabrication may be called a fabrication. Shops that specialize in this type of metal work are called fab shops. The end products of other common types of metalworking, such as machining, metal stamping, forging, and casting, may be similar in shape and function, but those processes are not classified as fabrication.

Fabrication comprises or overlaps with various metalworking specialties:

  • Fabrication shops and machine shops have overlapping capabilities, but fabrication shops generally concentrate on metal preparation and assembly as described above. By comparison, machine shops also cut metal, but they are more concerned with the machining of parts on machine tools. Firms that encompass both fab work and machining are also common.
  • Blacksmithing has always involved fabrication, although it was not always called by that name.
  • The products produced by welders, which are often referred to as weldments, are an example of fabrication.
  • Boilermakers originally specialized in boilers, leading to their trade's name, but the term as used today has a broader meaning.
  • Similarly, millwrights originally specialized in setting up grain mills and saw mills, but today they may be called upon for a broad range of fabrication work.
  • Ironworkers, also known as steel erectors, also engage in fabrication. Often the fabrications for structural work begin as prefabricated segments in a fab shop, then are moved to the site by truck, rail, or barge, and finally are installed by erectors.

Steel Fabricator Video



Raw materials

Standard raw materials used by metal fabricators are:

  • Plate metal
  • Formed and expanded metal
    • Tube stock
  • Welding wire/welding rod
  • Casting

Iron Fabricator | Erector |... in Visakhapatnam; We Deal with ...
photo src: fabricatoranderectorinvizag.nowfloats.com


Cutting and burning

The raw material has to be cut to size. This is done with a variety of tools.

The most common way to cut material is by shearing.

Special band saws designed for cutting metal have hardened blades and a feed mechanism for even cutting. Abrasive cut-off saws, also known as chop saws, are similar to miter saws but have a steel-cutting abrasive disk. Cutting torches can cut very large sections of steel with little effort.

Burn tables are CNC cutting torches, usually natural gas powered. Plasma and laser cutting tables, and water jet cutters, are also common. Plate steel is loaded on a table and the parts are cut out as programmed. The support table is made of a grid of bars that can be replaced. Some expensive burn tables also include CNC punch capability, with a carousel of different punches and taps. Fabrication of structural steel by plasma and laser cutting introduces robots to move the cutting head in three dimensions around the material to be cut.


Steel Fabrication Manufacturer, Supplier, Contractors in Delhi NCR
photo src: www.rathienterprises.in


Forming

Forming is an operation that converts a flat sheet metal work piece into a 3-D part. In this process, a raw material piece is formed by applying force to an object without adding or removing material. The force must be great enough to change the object's initial shape. The process of forming can be controlled with the use of tools such as punches or dies. Machinery can also be used to regulate force magnitude and direction. An example of machine-based forming can also combine forming and welding to produce lengths of fabricated sheeting, most commonly seen in the form of linear grating (used principally for water drainage).

Proper design and use of tools with machinery creates a repeatable form which can be used to create products for many industries, including jewelry, aerospace, automotive, construction, civil and architectural.


Structural steel fabrication with fully welded stiffener plates ...
photo src: www.steelmastersnyc.com


Machining

Machining is the process of removing unwanted material from the block of metal to get the desired shape. Machining is a trade in and of itself, although fab shops generally entail a limited machining capability including metal lathes, mills, and drills, along with other portable metal working tools.

Most components such as gears, bolts, screws, and nuts are manufactured by a machining process.


Rishi Steel Fabricator Photos, Munirka, Delhi-NCR- Pictures ...
photo src: www.justdial.com


Welding

Welding is the main focus of steel fabrication. The formed and machined parts will be assembled and tack welded into place then re-checked for accuracy. A fixture may be used to locate parts for welding if multiple weldments have been ordered.

The welder then completes welding as per the engineering drawings if welding is detailed, or as per his/her own judgement if no welding details are provided.

Special precautions may be needed to prevent warping of the weldment due to heat. These may include re-designing the weldment to use less weld, welding in a staggered fashion, using a stout fixture, covering the weldment in sand during cooling, and straightening operations after welding.

Straightening of warped steel weldments is done with an oxy-acetylene torch and is somewhat of an art. Heat is selectively applied to the steel in a slow, linear sweep. The steel will have a net contraction, upon cooling, in the direction of the sweep. A highly skilled welder can remove significant warpage using this technique.

Steel weldments are occasionally annealed in a low-temperature oven to relieve residual stresses. Such weldments, particularly those employed for engine blocks, may be line-bored after heat treatment.


Metal Fabrication Photo Gallery | K-zell Metals
photo src: www.kzell.com


Final assembly

After the weldment has cooled it is generally sand blasted, primed and painted. Any additional manufacturing specified by the customer is then completed. The finished product is then inspected and shipped.


Structural Steel Management
photo src: structural-steel-management.com


Specialties

Many fabrication shops have specialty processes which they develop or invest in, based on their customers' needs and their expertise:

  • Casting
  • Powder coating
  • Powder metallurgy
  • Welding
  • Machining

Source of the article : Wikipedia



EmoticonEmoticon

 

Start typing and press Enter to search